Home >

PA 8000 Series Two Zone Mixing Amplifier

Feature:

  • ●PA 8000 series is a PA Mixer Amplifier with 2 Zone, TEL/EMG, 7 input, MOH output, priority control and have Output Power rating from 120/240 Watt.
  • ●Extend connection:
    • -Wall panel control
    • -Call station with zone control
  • ●8Ω/70V/100V system.
  • ●Priority function. TEL > MIC1 > MIC2>MIC3~6/AUX.
  • ●AC or DC powered.
  • ●Tabletop or System Rack-mount.

Accessory:

  • ●PPS-A All-Call Microphone
  • ●PPS-02 Two Zone Paging Station
  • ●PWP-02 Two Zone Wall Control Panel

 

 

Front Panel:

  • ●MIC1~4 level control.
  • ●MIC1~4 Hi/Lo level control.
  • ●MIC5~6/LINE1~2 level control.
  • ●MIC5~6/LINE1~2 Hi/Lo level control.
  • ●AUX1~3 level control.
  • ●AUX1~3 Hi/Lo level control.
  • ●AUX Select button (AUX1/AUX2/AUX3)
  • ●AUX1~3 LED indicator
  • ●Zone 1 & 2 output select button.
  • ●Zone 1 & 2 LED indicator
  • ●Master VR controls total outputs level.
  • ●VU-Meter
  • ●Power ON LED indicator.

Rear Panel:

  • ●TEL/EMG Input Phoenix connector.
  • ●TEL/EMG level control.
  • ●MOH output 1V/600ohm, 1W/8ohm Phoenix connector.
  • ●MOH output level control.
  • ●MIC1: COMBI/RJ45 Balance Input with Trigger function.
  • ●MIC2: COMBI Balance Input with VOX function.
  • ●MIC1~2 Dipswitch for PTT/ Phantom Enable.
  • ●MIC3~4: COMBI Balance Input.
  • ●MIC3~4 Dipswitch for Phantom Enable.
  • ●MIC5~6: COMBI Balance Input.
  • ●MIC5~6 Slide switch for MIC/LINE sensitivity and Phantom Enable.
  • ●AUX1: COMBI Balance Input.
  • ●AUX2~3: RCA Unbalance Input.
  • ●CHIME on/off switch.
  • ●Paging Station RJ45 connector to connect to PPS-02
  • ●Wall Control Panel RJ45 connector to connect to PWP-02
  • ●Ext Amplifier: XLR Balanced Output.
  • ●REC OUT: RCA (MONO) Output.
  • ●PRE OUT: RCA (MONO) Output.
  • ●POWER IN: RCA (MONO) Input.
  • ●VOX VR controls vox level.
  • ●CHIME VR controls chime output level.
  • ●CHIME dipswitch to select OFF/1/2/4 Tones.
  • ●Power Remote Phoenix connector to remote power on the unit with 24VDC IN.
  • ●Zone1 & 2 Output: 100V, Phoenix connector.
  • ●Direct Output: 8Ω/ 70V/100V, Phoenix connector.
  • ●24VDC In to powered the unit, Phoenix connector.
  • ●AC Inlet
  • ●AC Voltage switch
  • ●Power ON/OFF switch.

 Specifications:

Performance

PA 8120

PA 8240

Max Rated Output Power 1kHz, ≤ 1% THD

120W

240W

Input Sensitivity & Impedance

MIC1~4 : 1.5mV@600Ω, Balanced

MIC5~6 (MIC/Line): 1.5mV@600Ω/100.0mV@47kΩ, Balanced

AUX1: 500mV@47kΩ, Unbalanced

AUX2~3: 200mV@47kΩ, Unbalanced

TEL: 100V/100mV@600Ω, Balanced

Paging Station: 1V@47kΩ, Balanced

POWER IN: 1V@47kΩ, Unbalanced

Tone Control

Bass: 100Hz , ±10dB,

Treble: 10kHz , ±10dB

Frequency Response

MIC1~6/LINE: 100Hz~15kHz, +1/-3dB

AUX1~3: 50Hz~20kHz, +1/-3dB

TEL: 100Hz~15kHz, ±3dB

S/N Ratio

MIC1~6 >60dB / LINE >75dB

AUX1~3 >75dB

TEL >70dB

Phantom Power

16V

Output

MOH Out: 8Ω/1W,  1V@600Ω

EXT. Amplifier: 1V Balanced

REC Out: 1V Unbalanced

PRE Out: 1V Unbalanced

Zone1~2: 100V

Direct Out: 8Ω/70V/100V

DC IN

24V/8A

24V/16A

Power On Remote IN

24VDC

Chime

2 tone

Nominal AC Line Voltage

115V/230V, 50/60Hz

Operation Temperature / Humidity

-10°C ~ +45°C @ 95% R.H. (Non-Condensing)

Storage Temperature

-20°C ~ +70°C

Dimensions (W x D x H)mm

430 x 385 x 88

Weight

11.0kg

14.0kg