PX 8240 Six Zone Mixing Amplifier

Feature:

• ●PX 8240 is a Six zone PA Mixer Amplifier with different choice source module and having TEL/EMG, 7 input, MOH output, priority control. It can extend to Zone with zone expander. With the Zone paging station it can make a call to different zone. An extra power Amplifier is needed to build a NON interrupt BGM system and have Output Power rating from 240 Watt.
• ●8Ω/70V/100V system.
• ●Priority function. TEL > MIC1 > MIC2>MIC3~6/AUX.
• ●AC or DC powered.
• ●Tabletop or System Rack-mount.

Accessory:

• ●PPS-A All-Call Microphone
• ●PPS-06 Six Zone Paging Station
• ●PPS-EX Zone Extension Station
• ●PWP-06 Six Zone Wall Control Panel
• ●MSB-CD7 SD/USB/CD/TUNER module.
• ●MSW-MSG Messenger module
• ●MSB-AIO All in one (SD/USB/TUNER) module

Front Panel:

• ●Source module area.
• ●MIC1~4 level control
• ●MIC1~4 Hi/Lo level control.
• ●MIC5~6/LINE1~2 level control.
• ●MIC5~6/LINE1~2 Hi/Lo level control.
• ●AUX1~3/Source module level control.
• ●AUX1~3/Source Hi/Lo level control.
• ●AUX Select button (Remote/Source/AUX1/AUX2/AUX3)
• ●Remote/Source /AUX1~3 LED indicator
• ●Master VR controls total outputs level.
• ●Fault LED indicator for amplifier fault (shorted, No pilot tone)
• ●Power ON LED indicator
• ●Zone 1 & 6 output Attenuator VR.
• ●Zone 1 & 6 LED indicator
• ●Zone 1 & 6 select button
• ●All Zone select button

Rear Panel:

• ●FM/AM Antenna connector
• ●Ext AMP IN 100V, Dry contact
• ●Zone 1~6 100V output.
• ●MOH output 1V/600ohm, 1W/8ohm, Phoenix connector.
• ●MOH output level control.
• ●TEL/EMG 1V/100V Input Phoenix connector.
• ●TEL/EMG level control.
• ●Paging Station RJ45 connector.
• ●Wall Control Panel RJ45 connector.
• ●Ext Amplifier out: XLR Balanced
• ●REC Out: RCA (MONO) Output
• ●PRE OUT: RCA (MONO) Output.
• ●POWER IN: RCA (MONO) Input.
• ●VOX VR controls vox level.
• ●To PEX8000: RJ45 connect to Next unit (PEX8000)
• ●MIC1: COMBI/RJ45 Balance Input with Trigger function.
• ●MIC2: COMBI Balance Input with VOX function.
• ●MIC1~2 Dipswitch for PTT/ Phantom Enable.
• ●MIC3~4: COMBI Balance Input with VOX function.
• ●MIC3~4 Dipswitch for Phantom Enable.
• ●MIC5~6: COMBI Balance Input with VOX function.
• ●MIC5~6 Slide switch for MIC/LINE sensitivity select and Phantom Enable.
• ●AUX1: COMBI Balance Input.
• ●AUX2~3: RCA Unbalance Input.
• ●CHIME VR controls chime output level.
  • -CHIME OFF/1/2/4 Tones.
  • -MICOPHONE input priority (FIFO, LIFO, MIX, OFF)
  • -20kHz Pilot-tone On/OFF to monitor Amplifier errors.
  • -Mode for 1 Channel (interrupt BGM) or 2 channel mode ( NON-interrupt BGM)
• ●Power Remote Phoenix connector to remote power on the unit with 24VDC IN.
• ●Direct Output: 8Ω/ 70V/100V, Phoenix connector.
• ●24VDC In to powered the unit, Phoenix connector.
• ●AC Inlet
• ●AC Voltage switch
• ●Power ON/OFF switch.

 Specifications: